Search

TOUGH Cardioid Condenser Microphone Hard Case with Dense Foam for Audio-Technica AT2020 / AT2020USB / ATR2500-USB / AT2035 Studio and USB Microphones - Fits Device and Accessories
TOUGH Cardioid Condenser Microphone Hard Case with Dense Foam for Audio-Technica AT2020 / AT2020USB / ATR2500-USB / AT2035 Studio and USB Microphones - Fits Device and Accessories
Manufacturer : Distro-Tech
Amazon Price : $24.99
buy from amazon.com
Avg. Customer Rating:0 of 5.0
Availability: Usually ships in 24 hours Fulfilled by Amazon and Sold by DistroTech
Product Description
TOUGH Cardioid Condenser Microphone Hard Case with Dense Foam - Built TOUGH
This hard shell case's exterior is made of a dense, blow-mold composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your high value possessions. Interior protection consists of a Tri-Layer arrangement of a Solid Ester Foam Layer(Bottom, 0.5"), a Dense Pick & Pluck Foam Layer(Middle, 2.0") and a Convoluted Egg-Crate Foam Layer(Top Lid, 0.75"). With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. The locking mechanism accommodates 2 padlocks for keeping your devices secure.

Compact Travel and Storage
This hard case is made for microphones and is easy to transport using its convenient carrying handle or placing it inside a larger bag for travel. Measuring 12.0" x 9.5" x 3.5" in exterior dimensions, and internally fitting devices and accessories with maximum dimensions of 11.0" x 7.25" x 3.25", this case is perfect for on-the-go traveling or storage.

Unlimited Customization
The Pick & Pluck 2.0" thick middle layer of foam consists of individually pluckable cubes. Customize your foam layer to fit snugly around your microphone and accessories.

Fits Audio Technica Cardioid Condenser Studio and USB Microphones
AT2020 Studio Microphone
AT2020USB USB Microphone
AT2035 Studio Microphone
ATR2500-USB USB Microphone
AT2022 , AT2031 , AT2035 , ATR2100-USB and More
Product Details
  • Amazon Sales Rank: #11237 in Musical Instruments
  • Brand: Distro-Tech
  • Model: HRDCS-LK-PP-1173-ADTMIC-CR
  • Dimensions: 3.50" h x 9.50" w x 12.00" l,
  • Product Features
  • Protection against IMPACTS, DROPS, DINGS and DUST. Great for storing and protecting microphones and accessories
  • Hard exterior made of durable composite injection plastic. Internal tri-Layer foam cushioning with Pick & Pluck customizable layer
  • Sliding-lock mechanism with holes to accommodate pad lock security
  • Easily Fits Devices and Accessories with Maximum Dimensions: 11.0" x 7.25" x 3.25" ; External Dimensions: 12.0" x 9.5" x 3.5"
  • Customer Reviews

    Most helpful customer reviews

    1 of 1 people found the following review helpful.
    5Excellent protection - a little tough plucking out foam
    By Mike Tarrani
    I purchased this to house a Samson Concert 88 Handheld 16-Channel True Diversity UHF Wireless System. It's a tight fit with the receiver, mic and power supply, but it works. I intend to order another to house some DI boxes and a few smaller electronics components.

    The foam is a bit of a chore to form fit because it is not completely cut. I see that as a plus since pieces will not get pulled out and lost, but be prepared to spend some time with a sharp, long blade. A box cutter is perfect.

    Protection is excellent. There is the egg crate layer on the lid that also holds smaller objects in place. It provides a lot of protection against shock from dropping. The bottom compartment has a plain floor layer of foam and a middle layer that you can cut out.

    Note that the middle layer is 2 7/8 inches thick, and when combined with the top egg crate foam you should be able to accommodate items up to 3 to 3.25 inches thick.

    1 of 1 people found the following review helpful.
    5Great general purpose case
    By Justyn Zachariou
    Smaller than I thought, but just about big enough for what I wanted. The foam cells aren't that hard to dig out, just wiggle your finger in there and you'll separate them. Remember that you only got one shot if you want a solid block, which I botched in the battery area as you might be able to tell from the picture of my newly customized mini quadcopter case, so measure twice, cut once. I particularly like the egg carton lid lining and the slide locks. The foam seems to be a good density, but the cuts in it and the lack of it being bonded to the floor make thin walls floppy. Not that big a deal though. The case itself is made of thick, non-brittle plastic. Time will tell if the foam and hinges will hold up to usage.

    0 of 0 people found the following review helpful.
    5This item was perfect for what I intended it to be used for
    By Leslie K. Penny
    This item was perfect for what I intended it to be used for. It will fit two, possibly three, Ocarina's comfortably. My 12 year old needed a case for his Ocarina hobby so his instrument can stay safe and this case is perfect! My husband just cut out some of the foam so the Ocarina could fit in snuggly and comfortably. The price was on par for this need and we are happy with our purchase.

    See all 29 customer reviews...