Most helpful customer reviews
8 of 8 people found the following review helpful.
The system itself when working is fine.. the seller not so much
One of the strips was defective. Only half of it worked.. the portion where it stopped working seemed to have been cut. I contacted the seller for a replacement, but haven't heard back. Too much of a hassle to return. The system itself when working is fine.. the seller not so much.
5 of 5 people found the following review helpful.
STAY AWAY!!! You've been warned!!
By Amazon Customer
This item is really cheap and doesn't work. I have used over a 100 different LED ribbon light kits and the one from this company and this set is toast. After taking the time to install everything on my camper for outside accent and awning lighting it quit working on first weekend camping. My son is night blind and LED ribbon lights work great for extra lighting. BUT STAY AWAY FROM THIS KIT. Controller and light strips all quit working. Now I have to order more parts, remove everything that I already installed, and install all new components. UGH!!
2 of 2 people found the following review helpful. See all 110 customer reviews...
Almost everything I wanted and expected.
Great value! These were cut and soldered with EvZ 4 Color 20m RGB Extension Cable Line for LED Strip RGB 5050 3528 Cord 4pin for under-cabinet lighting, then mounted with Alightings Strip Light Mounting Bracket Clip for Outdoor Silicone Covered 10mm Wide PCB Waterproof SMD5050 LED Strips (Pack of 100) to the front lip of the cabinets. I did not attempt the adhesive and I wanted to be able to replace the LED strip easily if they ever break.
The remote offers many pre-set selections: The color buttons are pre-set hues that can be dimmed using the top left buttons. The bottom and right buttons have various fade, switch, and strobe options that can be sped up or slowed down using two other buttons ("quick" and "slow"). The left lower buttons marked "DIY1," "DIY2," etc. allows you to set custom colors using the RGB arrows, but these settings cannot be dimmed. If the unit is turned off via remote or loses power due to blackout, wall switch, or power strip; the last used setting and DIY settings are saved.
The LEDs are a little darker on full bright than I would like. The LEDs furthest from the control box are dimmer than the LEDs closest to the box.